BRW80/20 mine emulsion pump product introduction
BRW80/20 mine emulsion pump station is mainly to provide high pressure emulsion for mining face, as the power source of hydraulic support and passage of the working face conveyor. BRW80 seriesemulsion pump station is composed of two emulsion pump and a RX-640 type emulsion box, hydraulic power source is the high-grade general mining working face of coal mine single hydraulic prop andeconomic type of fully mechanized working face hydraulic support.Due to the reasonable structure, reliable performance, convenient maintenance, welcomed by the majority of users.
BRW80/20 mine emulsion pump scope
BRW80/20 mine emulsion pump station used in the operation of various mines, national defense, tunnel and tunnel. Mainly for the coal face, tunneling machine with high pressure emulsion, can meet the general mining face, fully mechanized face different requirements. Automatic water inlet, pump overpressure automaticunloading, emulsion concentration ratio can be adjusted freely, has the advantages of flexible operation, convenient movement, efficient,energy-saving, safety, corrosion resistance, wear resistance,transmission distance and so. According to the customer demandcan be equipped with vacuum electromagnetic starter, emergency switch, accumulator.
BRW80/20 mine emulsion pump structure introduction
BRW80/20 mine emulsion pump is a horizontal five plunger reciprocating pump, belonging to the mobile station, also can be used for fixing the pumping station. This pump is driven by a three-phase AC horizontal level Four explosion-proof asynchronous motor, the speed reducer drives the crankshaft to rotate, and thecrank connecting rod mechanism to drive the plunger reciprocatingmotion, so that the work of liquid through the suction, exhaust valvesuction and discharge, so that the electrical energy into hydraulic energy, output high pressure liquid for the working of the hydraulic support. Equipped with high security and automatic self adjustmentof valve of high pressure pump discharge outlet, so as to ensure the reliability of hydraulic system.
In the use process, careful maintenance and maintenance, to ensure the normal operation of pumping station, the stationaccording to the use requirements of users, with different power motors, a variety of pressure levels. For high yielding work surfacecan be configured three pump two box.
BRW80/20 mine emulsion pump station main parameter
Type
|
Nominal flow rate L/min
|
Working pressure
MPa
|
Plunger diameter
mm
|
Piston number
|
Reciprocal time
Time/min
|
Motor power
kw
|
Liquid tank volume
L
|
BRW80/15
|
80
|
15
|
40
|
3
|
532
|
30
|
640
|
BRW80/20
|
80
|
20
|
40
|
3
|
532
|
37
|
640
|
BRW80/35
|
80
|
35
|
40
|
3
|
532
|
55
|
640
|
No comments:
Post a Comment