WQ type submersible sewage pump product introduction
WQ type non clogging submersible sewage pump impeller structureand mechanical seal, can effectively contain solids and long transmission fiber. Compared with the conventional impeller impeller,the pump impeller uses a single or dual channel form, it is similar to a cross-section of the same size pipe, with a flow of very good too, with reasonable volute chamber, the pump has the advantages of high efficiency, the impeller by the static and dynamic balance test, the pump running without vibration.
Characteristics of WQ type non clogging submersible sewage pumphas remarkable energy saving effect, anti winding, no blocking,automatic installation and automatic control etc.. In the carriage of solid particles and long fiber waste, has a unique effect.
WQ type submersible sewage pump scope
WQ type non clogging submersible sewage pump is suitable for
chemical, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, as well asplant drainage system, municipal engineering, construction sites inthe city sewage treatment industry conveyor belt particles in the water, dirt, also Secretary for pumping clean water and corrosivemedium.
WQ type submersible sewage pump product feature
1 Using a unique single or double blade impeller structure, greatly improving the through capacity of sewage, can effectively through the fibre material 5 times of pump diameter and solid particles 50% of pump diameter.
2 Mechanical seal using the new hard corrosion-resistant, can pump the safety running 8000d~above.
3 The compact structure, small volume, low noise, energy saving,convenient maintenance, no need of pump room, dive into the water to work, greatly reducing the project cost.
The oil chamber is provided with a water leakage detection sensor for high precision anti-interference seal.
4 The pump, stator winding embedded within the thermal components, automatic protection of electric pumps.
5 According to the needs of users equipped with full automatic control cabinet for the pump, the water leakage, leakage, overload and over temperature automatic protection, improved product safety and reliability.
6 Float switches can be changed according to the required level, automatic start and stop the pump, without special care, is extremely easy to use.
7 The WQ series can be fitted with double rail automatic coupling installation system, it is to install, repair convenience, but this may not enter the sewage pit.
8 Itcan be used in the whole head, while the motor is not overloaded.
9 Two types of installation, fixed automatic coupling installation system, mobile free installation system.
WQ type submersible sewage pump installation system instruction
1, Automatic coupling device system
Suitable for long-term use, installation fast, easy detection, repairand so on. The system use the special base, fixed in the sewage pit bottom, and the water outlet pipe connection, in the tank topmounted bearing block matching with the guide rod, so that the twoconnected. Pump and specific bracket are connected. Along the guide rod down to the base, and the automatic coupling, seal, seal,and ascension will automatically fall off.
2, Mobile installation system
It is supported by a bracket, connecting the outlet hose can work,this approach is mainly used in emergency or repair needed type.
No comments:
Post a Comment