MG132/320-WD Continuous Miner
continuous miner , mining machinery , continuous mining machine , mining shearer
zhongmeixx0005@gmail.com
https://www.chinacoalintl.com
https://www.railroadmachinery.com
https://www.chinacoalgroup.com
Underground Coal Mining Machinery MG132/320-WD Continuous Miner Introduction
Underground Coal Mining Machinery MG132/320-WD Continuous Miner is suitable for thick coal seam mechanized mining face,cutting height range from 0.85~1.55m.
Performance and characteristic
Used in mining the coal seam of 0.85-1.55m
The speed regulator is hydraulic-driven,moves on trail.
Full protection on over-loading and over-heating, expect the pump engine.
High working rate, a short,narrow and thin body give a good adoption of thin coal seam.
The main part of the machine is shaped as a tank, high strength.
The hydraulic and machinery rotate system has enough margin.
The cutting part has been redesign to improve the efficiency.
The security level has been raised by installing the speed regulator.
Underground Coal Mining Machinery MG132/320-WD Continuous Miner Parameter
Model
|
MG132/320-W( Basic)
MG132/320-WD ( Basic)
|
MG132/320-W(high height )
MG132/320-WD (high height )
|
Cutting height range( m)
|
1.3~2.690/2.740(Ø1.25 roller)
1.4~2.765/2.815(Ø1.4 roller) 1.6~2.865/2.915(Ø1.6 roller) |
1.3~2.790/2.840(Ø1.25 roller)
1.4~2.865/2.915(Ø1.4 roller) 1.6~2.965/3.015(Ø1.6 roller) |
Cutting depth(m)
|
0.6
|
0.6
|
Adapt dip angle (°)
|
≤35
|
≤35
|
Roll drum diameter (m)
|
Ø1.25; Ø1.4;Ø1.6
|
Ø1.25; Ø1.4; Ø1.6
|
Roll drum speed (r/min)
|
46
|
52
|
Length of rocker (mm)
|
1700(bend rocker)
|
1700(bend rocker)
|
Rocker arm swinging centre distance (mm)
|
5700(320-W)
|
5800(320-WD)
|
No comments:
Post a Comment