IHGB stainless steel pipeline explosion-proof pump product instruction
IHGB stainless steel pipeline explosion-proof pump adopts IS single stage single suction centrifugal pump performance parameters,clever combination of design based on the general vertical pump andat the same time, according to the temperature, medium, different in type ISG was derived based on Application of hot water, high temperature corrosion resistant chemical pump, oil pump. This seriesproduct has the advantages of high efficiency and energy saving,low noise, reliable performance, etc..
IHGBstainless steel pipeline explosion-proof pump scope
IHGB stainless steel pipeline explosion-proof pump is widely used in chemical, petroleum, metallurgy, light industry, synthetic fiber,environmental protection, food, medicine and other departments.This kind of product is stable and reliable performance, good sealing performance, handsome in appearance, convenient operation and other advantages. In order to improve the product quality, reduce therun, run, drip, leak, to prevent pollution, improve the environment,play a big role. Stainless steel pump transmission medium PH:2-12
IHGBstainless steel pipeline explosion-proof pump product feature
1、 Pump for the vertical structure, import and export of the same caliber, and at the same center line, as the valve can be installed in the pipeline, compact appearance, small occupation area, lowconstruction inputs, such as protective cover can be placed outdoors.
2、 Impeller mounted directly on the motor lengthened shaft, short axial dimensions, compact structure, pump and motor bearings reasonable configuration, can effectively balance the pump cover theradial and axial load, so as to ensure the smooth operation of the pump, vibration and noise is very low.
3、Seal mechanical seal mechanical seal or a combination, medium and high temperature mechanical seal with cemented carbide materials,wear-resistant sealing, and can effectively prolong the service life of mechanical seal.
4、Easy installation and maintenance, no need to open the pipeline system, remove the pump as long as the union nut can block out all the rotor parts.
5、According to the requirement that the needs of flow and head with pump series, parallel operation.
6、According to the requirements of piping layout using the vertical and horizontal pump installation.
IHGBstainless steel pipeline explosion-proof pump model significance
For example: IHGB50-160 (I) A
IHGB- stainless steel explosion-proof chemical pump
50- pump inlet and outlet, nominal diameter (mm)
160- impeller outer diameter (mm)
I- traffic classification
A- second cut impeller
IHGBstainless steel pipeline explosioin-proof pump working conditions
1.The suction pressure ≤ 1.0MPa, or maximum working pump system pressure ≤ 1.6MPa, namely the suction pressure and pump head,pump hydrostatic test pressure ≤ 1.6MPa ≤ 2.5MPa.
2. Environmental temperature > 40 ℃, relative humidity is lower than 95%.
3. The volume fraction of solid particles in the medium of no more than0.1 per unit volume, particle size < 0.2mm.
No comments:
Post a Comment